Ricoh Pro C651ex Operating Instructions Manual page 55

Problem
You cannot combine certain
functions.
When sorting, the pages are
divided into two blocks.
Images are skewed.
Images are skewed.
Paper does not output during
printing with stapling.
Edit
Problem
In Double Copies mode,
parts of the original image
are not copied.
In Erase Border, Erase
Center, or Erase Center /
Border mode, parts of the
original image are not
copied.
In Erase Border, Erase
Center, or Erase Center /
Border mode, parts of the
original image are not
copied.
Causes
The selected functions cannot
be used together.
The memory became full
during sorting and pages
were delivered in two blocks.
The side fences in the paper
feed tray are not set properly.
The paper is feeding in at an
angle.
When you stop printing while
using the staple function,
paper not stapled during
printing may be left in the
staple unit.
Causes
The combination of original
and copy paper is not
correct.
You have entered a wide
erase margin.
The originals are not scanned
correctly.
When You Cannot Make Copies As Wanted
Solutions
Check the combination of functions, and
then make the settings again. See
"Function Compatibility", Copy and
Document Server Reference
In [Copier / Document Server Features],
under [Input / Output], set [Memory Full
Auto Scan Restart] to [Off].
Make sure the side fences are set
properly. For details about how to set the
side fences, see "Changing the Paper
Size", About This Machine
Load the paper correctly. See "Loading
Paper", About This Machine
Press the [Clear Modes] key, and then
cancel copy settings, including stapling.
Remove the paper that was left in the
stapling unit while copying.
Solutions
Select the paper size again. For
example, select A3 for A4 originals.
See "Double Copies", Copy and
Document Server Reference
Reduce the width of the erase margin.
For details, see "Erase Center / Border",
Copy and Document Server Reference
.
Place the originals correctly.
.
2
.
.
.
53