Ricoh Pro C651ex Operating Instructions Manual page 65

Message
"Exceeded max. number of
alphanumeric characters for
the path."
"Exceeded max. number of
files which can be used in
Document Server at the same
time."
"Exceeded max. number of
stored files. Cannot send the
scanned data as capturing
files is unavailable."
"Exceeded time limit for LDAP
server search. Check the
server status."
"LDAP server authentication
has failed. Check the
settings."
"Invalid certificates or no S/
MIME certificates were
found."
Causes
There are too many
alphanumeric characters.
The document server is
already full.
Too many files are waiting to
be delivered.
A network error has occurred
and connection has failed.
The user name and password
differ from those set for LDAP
Authentication.
The destination's S/MIME
certificates are invalid or
cannot be found.
Messages Displayed When Using the Scanner Function
Solutions
Enter no more than the maximum number
of alphanumeric characters. See "Values
of Various Set Items for Transmission/
Storage Function", Scanner Reference
.
Check the files stored by the other
functions, and then delete unnecessary
files. For details about how to delete files,
see "Deleting a Stored Document", Copy
and Document Server Reference
Try again after they have been delivered.
• Try the operation once more. If the
message is still shown, the network
may be busy.
• In [System Settings], under
[Administrator Tools], check the
settings of LDAP server. For details,
see "Programming the LDAP
server", Network and System
Settings Reference
In [System Settings], under
[Administrator Tools], check the settings
of LDAP server. For details, see
"Programming the LDAP server",
Network and System Settings Reference
.
Contact your administrator.
3
.
.
63