When Z-Folded Paper Is Not Properly Aligned; Finisher Sr4040; Finisher Sr4050 - Ricoh Aficio MP 7001 Troubleshooting Manual

7. Appendix

When Z-folded Paper Is Not Properly Aligned

Install the auxiliary Z-fold support tray if Z-folded prints are not output tidily.

Finisher SR4040

Use the following procedure to attach the Z-fold support tray for the Finisher SR4040 to the Finisher Shift
Tray or Finisher Upper Tray.
1. Remove the prints.
2. Attach the Z-fold support tray to the finisher upper tray or finisher shift tray.
Finisher Upper Tray:
7
Finisher Shift Tray:

Finisher SR4050

Use the following procedure to attach the Z-fold support tray for the Finisher SR4050 to the Finisher Shift
Tray or Finisher Upper Tray.
148
BAS012S
BQM025S