Ricoh Pro C651ex Operating Instructions Manual page 49

Message
"Magazine or Booklet mode
is not available due to mixed
image mode."
"Magazine or Booklet mode
is not available due to mixed
color modes."
"Maximum number of sets is
n."
(A figure is placed at n.)
"Original is being scanned by
another function. Switch to
the following function, then
press the Stop key to cancel
scanning or press the Start
key to continue."
"Rotate Sort is not available
with this paper size."
"Stapling capacity
exceeded."
Messages Displayed When Using the Copy/Document Server Function
Causes
You selected the "Magazine"
or "Booklet" function for the
original scanned using
different functions, such as
copier and printer.
You selected the "Magazine"
or "Booklet" function for
originals stored using copier
function with different color
mode, such as full color mode
and black & white mode.
The number of copies
exceeds the maximum copy
quantity.
The Copier function is not
available.
The Rotate Sort function does
not support the selected
paper size.
The number of sheets per set
is over the staple capacity.
Solutions
Make sure the original for the
"Magazine" or "Booklet" function is
scanned using the same function.
Make sure originals for the "Magazine"
or "Booklet" function are stored using the
same color mode.
You can change the maximum copy
quantity using the [Max. Copy Quantity]
setting in [General Features] under
[Copier / Document Server Features].
For details about Max. Copy Quantity,
see "General Features", Copy and
Document Server Reference
Cancel the job. Press [Exit], and then
press the [Document Server] key. Next,
press the [Stop] key. When the message
"The Clear / Stop key was pressed. Are
you sure you want to stop scanning?"
appears, press [Stop].
Select a supported paper size. See
"Sort", Copy and Document Server
Reference .
Check the stapler capacity. See
"Specifications for Finisher SR5030
(Optional)" or "Specifications for
Booklet Finisher SR5040 (Optional)",
About This Machine
2
.
.
47