Ricoh Pro C651ex Operating Instructions Manual page 57

Problem
When using Combine, parts
of the image are not copied.
Copies are not in correct
order.
Duplex
Problem
Cannot copy in Duplex
mode.
Cannot copy in Duplex
mode.
Cannot print in duplex mode. You have selected a paper
Copies are not in correct
order.
Causes
You specified a reproduction
ratio that does not match the
sizes of the originals and
copy paper.
You placed the originals in
the incorrect order.
Causes
The paper is too thick or too
thin.
"Apply Duplex" is set to [No]
for Tray 1-6.
type that cannot be used for
duplex copying.
You placed the originals in
the incorrect order.
When You Cannot Make Copies As Wanted
Solutions
When you enter a reproduction ratio
using Manual Paper Select mode, make
sure the ratio matches the originals and
the copy paper. Select the correct
reproduction ratio before using
Combine mode. See "One-Sided
Combine", "Two-Sided Combine", or
"Auto Reduce / Enlarge", Copy and
Document Server Reference
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place the originals on the
exposure glass, start with the first page
to be copied.
Solutions
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine
In [Tray Paper Settings], under Tray 1-6,
set "Apply Duplex" to [Yes].
In [Tray Paper Settings], select a paper
type that can be used for duplex print.
For details about the paper types that
can be used, see "Duplex Copying",
Copy and Document Server Reference
.
When placing a stack of originals in the
ADF, the last page should be on the
bottom.
If you place the originals on the
exposure glass, start with the first page
to be copied.
2
.
.
55