Returning To The Previous Setting - Ricoh Pro C651ex Operating Instructions Manual

6. Place the test pattern on the exposure glass, and then press [Start Scanning].
The image will be corrected after "Scanning...Please wait." disappears.
• The test pattern will not be read if it is set in the ADF.
• The test pattern will be printed on an A4 , 8
available, B4 JIS , A3 , or 11" 17"
tray.
• Set the test pattern in the following way:
• Make sure to set the test pattern on the exposure glass, and then two or three white sheets, same size
as the test pattern, above the test pattern.

Returning to the Previous Setting

"Previous Setting" means to return to the previous status before any changes.
1
/ " 11" size page. If A4 or 8
2
will be used. Make sure to check the paper set in the paper
BAZ030S
Auto Color Calibration
1
1
/ " 11" is not
2
29