Ricoh Pro C651ex Operating Instructions Manual page 26

1. When the Machine Does Not Operate As Wanted
Problem
Misfeeds occur frequently.
1
Misfeeds occur when printing
to envelopes.
Misfeeds occur when printing
to envelopes.
When printing to envelopes,
the envelopes may be fed in
together, or the envelopes
may not be fed.
24
Causes
The staple cartridge is not set
correctly.
The envelopes are curled.
You printed envelopes with a
non-rectangular flap when
[Skew Detection] was set to
[On].
The envelopes are curled.
Solutions
Set the staple cartridge properly. The
Booklet Finisher SR5040 requires the
saddle stitch staple cartridge. For details
about how to add staples, see "Adding
Staples", About This Machine
• Make sure you fully flatten curled
envelopes before you load them.
Do not stack envelopes over the
limit mark on the paper tray.
• If misfeeds still occur after the
envelopes have been flattened,
load envelopes on the Wide LCT
one at a time and print them
individually.
• For details about how to load
envelopes, see "Envelopes", About
This Machine .
Make sure you set [Skew Detection] to
[Off] when printing envelopes with a
non-rectangular flap.
For details about setting of skew
detection, see "Adjustment Settings for
Operators", Network and System
Settings Reference .
• Make sure you fully flatten curled
envelopes before you load them.
Do not stack envelopes over the
limit mark on the paper tray.
• If misfeeds still occur after the
envelopes have been flattened,
load envelopes on the Wide LCT
one at a time and print them
individually.
• For details about how to load
envelopes, see "Envelopes", About
This Machine .
.