Using Thick Coated Paper - Ricoh Pro C651ex Operating Instructions Manual

4. Set the auxiliary tray for thin coated paper by aligning the tray with grooves on the end
fence.
5. Press the [Suspend/Resume] key to restart the print.
• When the output paper curls downward, it might not align properly, even if the auxiliary tray for thin
coated paper is used. If the paper curls downward, fan the stack of paper and fix the curl before
printing, then turn the paper over and place it back on the Wide LCT. If your machine has a paper
curl correction function, correct the paper curl to make the paper flat or curl upward. For details about
the paper curl correction function, see "Adjustment Settings for Operators", Network and System
Settings Reference
• If the output paper fails to align properly on the auxiliary tray for thin coated paper, use the auxiliary
paper tray. For details about setting the auxiliary paper tray, see p.39 "Using Thick Coated
Paper".
• When removing the output paper, make sure the auxiliary tray for thin coated paper remains in its set
position.

Using Thick Coated Paper

When the paper weight is 105.1 g/m
Weight 7), and the paper size is B4 , 8
CDN026
.
2
, 28.1 lb. Bond or more (paper thickness: Paper Weight 4 to Paper
1
/ " 14"
2
When Coated Paper Is Not Properly Aligned
or larger, use the auxiliary paper tray.
1
39