Ricoh Pro C651ex Operating Instructions Manual page 28

1. When the Machine Does Not Operate As Wanted
Problem
The position of the fold is
incorrect when letter fold-in is
1
applied to B5 sheet.
Paper is bent.
The print image is not
properly positioned on the
paper.
• If you cannot make copies as you want because of paper type, paper size, or paper capacity
problems, use recommended paper. See "Recommended Paper Sizes and Types", About This
Machine
• Curled paper causes misfeeds, soiled paper edges, or slipped positions while performing staple or
stack printing. When using curled paper, first straighten the curl with your hands or by placing the
paper upside down. Also, lay paper on a flat surface to prevent paper from curling, and do not lean
it against the wall.
26
Causes
Multi-sheet fold has been
specified when only one
sheet is being printed.
Paper may be bent when it is
ejected from the finisher
upper tray.
The machine has not detected
the paper type and/or width
correctly.
.
Solutions
In [Output/ Customize Function/
Finisher] on the initial copier screen,
under [Fold], select [Letter Fold-in]. Press
[Change], and then set "Multi-sheet
Fold" to [Off]. For details about how to
specify the multi-sheet fold function, see
"Finishing", Copy and Document Server
Reference .
Change the output tray to the finisher
shift tray.
Contact the machine administrator or
your service representative.