Pitney Bowes DM300c Operator's Manual page 126

5. Clean the brush in plain water, and rinse thoroughly.
6. Position the brush as shown at
right so its bottom edge is under
the mounting tabs.
7. Slide the brush back toward the
rear of the moistener.
8. If you need to clean the wick and holder, continue with Removing
the Holder and Wick procedure on the next page. Otherwise,
push down on the blue release lever on the moistener.
9. Slide the moistener back onto the machine. You should hear a
click as it engages.
SV61991 Rev. A
11 • Maintenance
Release
Lever
11-15