Pitney Bowes DM300c Operator's Manual page 81

Setting the Normal Preset Timeout
The Normal Preset is a defaulted screen that your machine
automatically returns to after a set period of time. You can set the
amount of time the display takes before it reverts to the Normal
Preset.
1. Press Menu.
2. Select "Setup".
3. Select "Time and Timeouts".
4. Select "Normal Preset Timeout".
Accept
5. Key in the amount of minutes (from 1-240) you want the system
to wait before returning to the Normal Preset. The default time is
64 minutes.
6. Select "Accept". The display returns to Time & Timeouts menu.
Setting Sleep Mode Timeout
You can set the amount of time the machine waits before entering
"Sleep Mode". When the machine is in sleep mode, the display is
blank and you can't process mail. You "awaken" the machine by
pressing almost any key on the control panel.
NOTE: The Stop and Start keys will not wake the machine.
1. Press Menu.
2. Select "Setup".
3. Select "Time and Timeouts".
4. Select "Sleep Mode"
5. Key in the amount of minutes (from 1-240) before the system
goes into Sleep Mode.
6. Select "Accept". The display returns to Time & Timeouts menu.
SV61991 Rev. A
Normal Preset
Timeout
Enter Timeout
64
(1-240 minutes)
7 • System Options
7-5