Adjusting The Contrast Of The Display - Pitney Bowes DM300c Operator's Manual

7 • System Options
Setting Daylight Saving Time
1. Press Menu.
2. Select "Setup".
3. Select "Time and Timeouts".
4. If necessary, press the green down arrow key to scroll through
the menu screens.
5. Select "Daylight Savings". The display shows the current setting.
Current Time: 1:38 PM
Daylight Saving :
6. Select "Daylight Saving" to toggle between:
• "Enable" if you want to use Daylight Saving Time, or
• "Disable" if you don not want to use Daylight Saving Time.
(This is the default setting.)
7. Press Enter to return to the Time & Timeouts menu.

Adjusting the Contrast of the Display

1. Press Menu.
2. Select "Setup".
3. Select "Display Contrast".
4. Select "Increase Contrast" or "Decrease Contrast" to change the
contrast level as necessary. The default is 6 lines (shown below).
- l l l l l l
Increase Contrast
Decrease Contrast
Accept
5. Select "Accept" to return to Setup menu.
7-6
Daylight Saving
Enable
Display Contrast
+
SV61991 Rev. A