Pitney Bowes DM300c Operator's Manual page 27

1. Feeder Access Cover—open this cover to access the moistener
bottle.
2. Seal/No Seal Lever—allows you to turn envelope sealing on
and off.
3. LED—lights green when your system is on; lights orange when
your system is in "sleep" mode.
4. Ink Access Cover—opens up to allow replacement of the ink
cartridge. See Chapter 11, Maintenance for instructions.
5. Weighing Platform—allows you to weigh and calculate postage
of a mail piece based on the service selected.
6. Ink Waste Tank—prevents spillage of ink.
7. Control Panel—allows you to enter and setup information on
your machine.
8. Printer Clearance Lever (two position)
• Home - printer rollers engaged for processing mail (normal)
• Released - printer rollers disengaged; lower portion of printer
deck drops down so you can clear a stalled mail piece.
NOTE: The machine will not process mail when left in the
released position.
9. Printer Deck—supports your envelope, post card or tape strip
as it passes under the printer mechanism.
10. Tape Feeder—holds and feeds tape strips for printing.
11. Moistener—applies sealing fluid to the envelope flap. You
can seal envelopes or leave them unsealed, depending on the
position of the Seal/No Seal lever.
12. Side Guide—reduces the skewing of pieces of mail as you feed
them into the feeder.
13. Feeder Deck—supports your envelope, post card or tape strip
as it waits to be fed into the printer mechanism.
14. Quick Reference Guide Slot—allows you store the Quick
Reference Guide for easy access.
15. Stacker Tray—allows the neat stacking of finished mail pieces.
SV61991 Rev. A
2 • Getting to Know Your System
2-5