Replacing The Print Head - Pitney Bowes DM300c Operator's Manual

11 • Maintenance

Replacing the Print Head

Follow the steps below to change in print head on your system.
1. Navigate through the menus to perform the replacement
procedure:
A. Press Menu.
B. If necessary, press the green down arrow key to scroll
through the menu screens.
C. Select "Maintenance".
D. Select "Printer Maintenance".
E. Select "Replace Print Head".
2. Remove the ink cartridge. Refer to steps 2-4 in Replacing the Ink
Cartridge in this chapter for more information.
3. Squeeze the two gray tabs on either
side of the print head.
While squeezing, lift and tilt to the right
the print head. The print head should
come up out of the machine.
11-8 SV61991 Rev. A