Replacing The Print Head - Pitney Bowes DM100i Operator's Manual

10 • Maintenance

Replacing the Print Head

1. If you have a DM200L/DM225L, remove the weighing platform
by lifting it straight up.
2. Open the top cover. A "Top Cover Open" message displays.
3. Select "Replace Ink Tank" to continue (if you don't want to
change the print head at this time, simply close the top cover).
The message "Moving ink tank to replacement position" displays.
4. Unlatch the ink cartridge guard by sliding the green lever to the
right and flipping the guard open.
5. Lift up and remove ink cartridge.
10-8
Ink Cartridge
Guard
SV62276 Rev. C