Replacing The Print Head - Pitney Bowes dm60 series Operating Manual

Replacing the Print Head

IMPORTANT: This procedure should only be done under the
direction of or with the permission of a representative of your
machine supplier.
1. Press Menu/Options.
2. Use the Review ▲▼ keys to scroll to "Use ink functions?", then
press Enter/yes to confirm.
3. Use the Review ▲▼ keys to scroll to "Install new print head?",
then press Enter/yes to confirm.
4. Open the top cover and locate the print head.
5. Refer to the instructions that came with the new print head to
remove the old print head and install the new one.
6. Press Enter/yes to confirm the replacement. A print head
initialisation occurs which lasts about 2-3 minutes.
7. When prompted, insert an envelope/label sheet to print a test
pattern to confirm print quality.
8. If the test pattern looks good, press Enter/yes.
If the print has missing lines, press no and the DM60 Series will
perform another cleaning cycle.
9. When the test pattern looks good, press Enter/yes to return to
the Home screen.
SDC2029B
7 • Ink Maintenance
Good Test Print
(No broken lines in the
centre of the test print)
Poor Test Print
(broken lines in the cen-
tre of the test print)
7-5