Cable Kit, Power In - Power Out, Ac Conn; Toroid Kit, Display, Msr And Ac Power - Micros Systems Workstation 4 LX Service Manual

Introduction to the WS4/WS4 LX FRUs
Cables and Toroids
Cable Kit, Power In - Power Out, AC Conn - P/N 000170-003
Figure 1-14 displays the Power In and Power Out Cable Kit. It consists of the AC
input cable assembly and the power supply to system board cable. The Power-In cable
does not include a toroid. It is part of toroid kit P/N 700791-001, below. Both cables
are compatible with all WS4s including the WS4 LX.
Figure 1-14: WS4 and WS4 LX AC Input and Power Supply Cable Kit
Toroid Kit, Display, MSR, and AC Power - P/N 700791-001
Kit of three toroids. One each for the LCD interface cable, mag stripe reader cable,
and AC Power In cable assembly. WS4s that use the AB28-I, ABRD36 or ABRD86
system boards and the 400408-003 base do not require a toroid on the MSR cable.
1-16
Figure 1-15: WS4 and WS4 LX Toroid Kit
Workstation 4 and 4 LX Field Service Guide