Cable, Inverter To Rev I Bd, Ws4 Or Ws4 Lx; Touchscreen Extension Cable - Micros Systems Workstation 4 LX Service Manual

Cable, Inverter to REV I BD, WS4 or WS4 LX - P/N 300331-200
The cable shown in Figure 1-12 connects between the backlight inverter board and
system boards AB28-I, ABRD36, and ABRD86. This cable is not compatible with
WS4 System Boards AB28-F and AB28-G.
Figure 1-12: Inverter Cable for WS4 Rev I, ROHS and WS4 LX System Boards
Touchscreen Extension Cable - P/N 300331-350
This cable connects between the system board and the touchscreen ribbon cable. The
cable shown in the illustration below is an improved version of the original extension
cable and is compatible with all WS4 and WS4 LX system boards.
Workstation 4 and 4 LX Field Service Guide
Figure 1-13: Touchscreen Extension Cable
Introduction to the WS4/WS4 LX FRUs
Cables and Toroids
1-15