Pole Customer Display Connector - Micros Systems Workstation 4 LX Service Manual

Connector and Cable Diagrams
IO Panel Connectors

Pole Customer Display Connector

This I/O port connector is capable of driving a pole mounted customer display. Note
Workstation 4 System Boards AB28-F and AB28-G do not include an RX line.
System Boards AB28-I, ABRD36, and ABRD86 use the connector pin-out shown on
the right side of the illustration below.
Figure A-8: WS4 and WS4 LX Customer Display Connector Diagram
A-6 Workstation 4 and 4 LX Field Service Guide