Micros Systems Workstation 4 LX Service Manual page 23

• Compact Flash Daughter Card - P/N 400373-101.
The CF Daughter Card plugs into socket IDE1 on the LX System Board and J4 on
older System Boards. Cover and mounting hardware not included.
• IC, Compact Flash Card - P/N 700504-100.
A blank, formatted 256M Compact Flash Card. Can be used in any Workstation 4
or Workstation 4 LX.
• DIMM, DDR333 256M - P/N 700502-175.
Replacement DIMM. Approved devices include Wintec
WD1UN256X808-333B-QC-RA and Unigen UG732D6688KK-DHFMSE. Not
compatible with AB28 and ABRD36 System Boards.
• Cable, Rear LCD Customer, Integrated - P/N 400446-007.
This cable is pre-installed on all Workstation 4 LX System Boards. It attaches
between J1 on the System Board to the optional Integrated LCD Customer
Display. Compatible with the WS4 and KWS4.
• Battery - P/N 7000043-005.
CR2032 3V Lithium Coin Cell. This battery is also used on the WS4, WS5,
PCWS 2010, KWS4, and PCWS Eclipse System Boards.
• Power Supply - P/N 700351-019.
65W open frame power supply with +5V, +12V and -12V outputs. Compatible
with the WS4 and WS4 LX.
• Power Supply Fuse, Kit of 10 pcs. - P/N 000160-001.
3.15A, 250V AC Input fuse with pigtail leads for P/N 700351-019.
Workstation 4 and 4 LX Field Service Guide
Introduction to the WS4/WS4 LX FRUs
Workstation 4 LX System Board and Components
1-11