Kyocera Mita KM-3530 Service Manual page 73

12. Attach the large ejection cover using the two
screws that have secured the upper left cover.
13. Open the front cover and the conveying
cover.
14. Attach the staple cover.
* Tighten the two screws on the left side to
secure the cover with the copier, secure the
front side using the screw that has been
removed in step 3, and secure the right side
using a +TP-A chrome screw M3 × 05.
15. Attach the front ejection cover and the rear
ejection cover using a +TP-A chrome screw
M3 × 05 each.
Large ejection
cover
Figure 1-3-116
+TP-A chrome screw M3 × 05
Staple cover
Figure 1-3-117
+TP-A chrome screw M3 × 05
Rear ejection cover
+TP-A chrome screw M3 × 05
Figure 1-3-118
2BH/J
Front ejection cover
1-3-53