Kyocera Mita KM-3530 Service Manual page 251

2BH/J
Start key
DM
MC REM
EM
ESW
a:100 ms after the start key is pressed, the drive motor (DM) turns on.
b:100 ms after the drive motor (DM) turns on, main charging (MC REM) starts.
c:The leading edge of the paper turns on the eject switch (ESW), and at the same time the eject motor (EM) turns on.
d:409 ms after the paper is ejected and the eject switch (ESW) turns off, main charging (MC REM) ends.
e: 5 s after the end of main charging (MC REM), the eject motor (EM) turns off.
2-1-6
100 ms
100 ms
Timing chart 2-1-3 Main charging section operation
5 s
409 ms