Kyocera Mita KM-3530 Service Manual page 242

2BH/J
(6) Detaching and refitting the fixing unit thermistor
Follow the procedure below to replace the fixing unit thermistor.
Procedure
1. Remove the fixing unit (see page 1-6-36).
2. Remove the upper fixing cover (see page 1-
6-36).
3. Disconnect the connector of the fixing unit
thermistor.
4. Remove the heat roller (see page 1-6-39).
5. Turn the fixing unit over and remove the
screw to remove the fixing unit thermistor.
1-6-40
Connector
Figure 1-6-76
Fixing unit thermistor
Figure 1-6-77