Kyocera Mita KM-3530 Service Manual page 532

3CM
Maintenance
item No.
U670 Setting the V.34 symbol speed (2800 Hz)
(cont.) Sets if the V.34 symbol speed 2800 Hz is used.
1. Enter 1 or 2 using the numeric keys to change the setting.
Display
1: ON
2: OFF
2. Press the start key. The value is set.
3. To return to the screen for selecting an item, press the stop/clear key.
Completion
Press the stop clear key. The screen for selecting a maintenance item No. is displayed.
U680 Displaying the fax board ROM version
Note: On Japanese domestic models, this also displays the font ROM version.
Description
Displays the version of the ROM on the fax control PCB.
Purpose
Used to check the version of the ROM on the fax control PCB.
Method
1. Press the start key. The version of the ROM on the fax control PCB is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-32
Description
Description
V.34 symbol speed 2800 Hz is used.
V.34 symbol speed 2800 Hz is not used.