Kyocera Mita KM-3530 Service Manual page 535

Maintenance
item No.
U881 Error Codes for Operation U881
Code
001
002
003
004
005
006
007
008
009
010
011
012
Jig not present.
No CF card.
No data in CF card.
CF data is incompatible. (This error occurs if you change the file name and attempt to load
the data into a different machine model.)
Bad CF data (Checksum error)
CF read error
CF write error
No data is jig's flash memory // Incompatible data in jig's flash memory
(SRAM data has not yet been saved // Attempt was made to load data into a different
model.)
Jig flash-memory read error
(Following SRAM read, flash-memory data failed to match SRAM data.)
Jig flash-memory write error
Other error
Description
Meaning
3CM
1-3-35