Kyocera Mita KM-3530 Service Manual page 241

Hide thumbs Also See for KM-3530:

Table of Contents

(5) Detaching and refitting the heat roller

Follow the procedure below to replace the heat roller.

1. Remove the fixing unit (see page 1-6-36).

2. Remove the upper fixing cover (see page 1-

3. Remove the press roller and fixing heater M

and S (see pages 1-6-37 and 38).

4. Remove the fixing gear.

5. Detach the heat roller from the fixing unit.

Remove the C ring, gear, bearing and

bushing on the rear of the heat roller and then

remove the C ring, bearing and bushing on

6. Replace the heat roller and refit all the

removed parts.

Figure 1-6-74

Figure 1-6-75

Chapters

Table of Contents