Kyocera Mita KM-3530 Service Manual page 59

24. Fasten the shield cover into place with 13
screws.
25. Remove 1 screw and take off the modular
cover.
26. Hang the modular cover onto the holes on the
shield cover, and fasten it into place with 1
screw.
Figure 1-3-76
Figure 1-3-77
Holes
Figure 1-3-78
2BH/J
Shield cover
Screws
Screw
Modular cover
Screw
Modular cover
1-3-39