Nikon SMZ25 Instruction Manual page 28

4
Turn on the illumination and adjust the brightness.
Check that the brightness control selection switch on the
LED diascopic illumination base is set to the ON position.
Press the diascopic LED ON/OFF button on the remote
controller to turn on the LED illumination.
Check that the LED ON/OFF indicator lights.
Press the diascopic LED brightness control buttons to
adjust the brightness. Press [+] to increase the brightness
and [-] to decrease the brightness.
Illumination on and brightness control
rights
To turn on the diascopic illumination and perform
brightness control directly with the LED diascopic
illumination base, set the LED brightness control
selection switch to the OFF position.
For details about using the diascopic illumination
base, see Chapter 4, "8.1 P2-DBL LED Diascopic
Illumination Base."
Aperture diaphragm
The SMZ25 Zooming Body is equipped with an
aperture diaphragm. Turn the aperture diaphragm
dial counterclockwise (O side) to fully open the
aperture. (For details about using the aperture
diaphragm, see Chapter 3, "10 Using the Aperture
Diaphragm.")
5
Set the optical path to 100% to the binocular part.
→ Step 5 in "2 Procedure for Microscopy Under Episcopic Illumination"
6
Adjust the depression angle of the tilting tube.
→ Step 6 in "2 Procedure for Microscopy Under Episcopic Illumination"
7
Adjust the diopter.
→ Step 7 in "2 Procedure for Microscopy Under Episcopic Illumination"
8
Adjust the interpupillary.
→ Step 8 in "2 Procedure for Microscopy Under Episcopic Illumination"
Chapter 2
Microscopy Procedures
14
CTRL
TRL
ON OFF
LED brightness
control selection
switch
Setting brightness control right
to the control box
1 2
DISPLAY DISPLAY
Z-SPEED Z-SPEED
Coarse Coarse Fine Fine Ex Fine Ex Fine
ESCAPE ESCAPE
ON/OFF ON/OFF
−
ALZ ALZ
ON/OFF ON/OFF
Diascopic LED
brightness control
button
Remote on/brightness control
FL Cube FL Cube
3 4
Z-RESET Z-RESET
+
ZOOM STEP ZOOM STEP
1x 1x 0.5x 0.5x 0.1x 0.1x
−
Diascopic LED
ZOOM ZOOM
LIMIT LIMIT
STEP STEP
ON/OFF ON/OFF
ON/OFF button
+
ON/OFF ON/OFF
LED ON/OFF
indicator