1
Microscopy (Principles)
The microscope's objectives and optical zoom system enable the magnification of minute substances of such samples
placed on the stage as metal, mineral, and cells, so that microscopy and image capturing are performed with the focus
adjusted using the focus device.
Intended use of this product
This microscope is intended primarily for microscopic observations, experimentation and image capturing of samples
(metal, mineral, cells, etc.) placed on the stage, using diascopic and reflected illumination. Therefore, accuracy of the
numeric information (such as magnifications or Z-position information) is not guaranteed. These values are used as
reference and include a margin of error.
2
Performance Properties
Stereo microscope
Name
Zooming body
Model
SMZ18
Zoom ratio
18:1
Magnification
0.75 to 13.5x
NA
0.15
(For 1x objective and 13.5x zoom)
Objective
Circular dovetail with a drop prevention mechanism
mount
Zooming
Right/left single-axis knob
Click stop: 0.75x, 1x, 2x, 3x, 4x, 5x, 6x, 8x, 10x, 12x,
13.5x; cancelable
Aperture
Variable in the range from fully open to 3 mm dia.
diaphragm
Focus device
Name
Focus Unit
Model
P2-FU
Through rotation of the right/left single-axis
Vertical
coarse/fine focus knob
movement
method
Adjustable coarse focus knob torque
Focusing stroke
100 mm
Stroke per
Coarse: 18.50 mm/rev
rotation of the
Fine: 3.27 mm/rev
focus knob
Chapter 8
Specifications
106
Zooming body
SMZ25
25:1
0.63 to 15.75x
0.156
(For 1x objective and 15.75x zoom)
Circular dovetail with a drop prevention mechanism
Motorized
(No zooming knob)
Variable in the range from fully open to 3 mm dia.
Motorized Focus Unit
P2-MFU
Motorized
Focusing travel speed: coarse/fine/extra fine
movement switching method
(The focus speed changes based on the rotation
angle of the remote controller's knob.)
Coarse:
2 to 100 mm/second
Fine:
0.2 to 5 mm/second
Extra fine: 0.01 to 0.1 mm/second
100 mm
─