P-Sxy64 Xy Stage; C-Ssl Dia Sliding Stage; C-Trs Tilting Stage - Nikon SMZ25 Instruction Manual

P-SXY64 XY Stage

5.5
This stage shifts the glass plate in the X and Y directions when
the X/Y shift knobs are turned. Attach this stage instead of the
base or the stage plate on the stand. The glass plate measures
215 mm x 154 mm x 5 mm and is detachable.
A 45-mm dia. filter can be slotted into the optical-path hole on the
lower board of the stage.
[Compatible bases and stand]
 P2-PB Plain Base
 P2-DBL LED Diascopic Illumination Base
 P2-DBF Fiber Diascopic Illumination Base
 P-PS32 Plain Stand
(The movement of the stroke in the Y direction is restricted.)
 XY stroke of the stage with the X/Y shift knob and stroke per rotation of the knob
X: 150 mm; 37.5 mm per rotation
Y: 100 mm; 24.1 mm per rotation
 Load weight
5 kg or less
 Applicable range of diascopic illumination (bright field/ OCC)
150 x 100 mm travel range (Shading may occur in diascopic illumination or OCC illumination in the low zoom
magnification range.)

C-SSL DIA Sliding Stage

5.6
This stage enables fine movement of a sample when its side is
pushed.
Remove the stage plate of the base and attach it to the upper surface
of the sliding stage. Then, mount the sliding stage to the base.
[Compatible bases]
 P2-PB Plain Base
 P2-DBL LED Diascopic Illumination Base
 P2-DBF Fiber Diascopic Illumination Base
 P-PS32 Plain Stand

C-TRS Tilting Stage

5.7
This stage enables tilt observation of samples. Attach the stage to
the base or stand.
For details about usage, refer to the instruction manual for the
C-TRS Tilting Stage.
[Compatible bases and stand]
 P2-PB Plain Base
 P2-DBL LED Diascopic Illumination Base
 P2-DBF Fiber Diascopic Illumination Base
 P-PS32 Plain Stand
Chapter 4
Functions and Operations of the Devices
Shift using the P-SXY64 XY Stage
C-SSL DIA Sliding Stage
C-TRS Tilting Stage
50