Adjusting The Brightness - Nikon SMZ25 Instruction Manual

2

Adjusting the Brightness

The illumination brightness can be adjusted for the following devices. Turn the brightness control dial to adjust the brightness
to a comfortable level.
Depending on the system configuration, some devices support remote control of the brightness.
For details, see the sections in Chapter 4 describing how to use the individual devices.
 Adjust the brightness using the adjustment volume of the
device
 P2-DBL LED Diascopic Illumination Base
 Adjust the brightness using the C-FLED2 LED Light source for
fiber illuminator
(See the instruction manual supplied with the C-FLED2 for
details.)
 P2-CI Coaxial Epi Illuminator
 C-FDF Flexible Double Arm Fiber Illumination Unit
 P2-FIR Ring Fiber Illumination Unit
 P2-DBF Fiber Diascopic Illumination Base
 Adjust the brightness using the C-HGFI/C-HGFIE HG
Precentered Fiber Illuminator
(See the instruction manual supplied with the
C-HGFI/C-HGFIE for details.)
 P2-EFLI Epi Fluorescence Attachment
 P2-EFLM Motorized Epi Fluorescence Attachment
 Adjust the brightness using the power supply section of each
unit
(See the instruction manual supplied with the P2-FIRL/P-DF
for details.)
 P2-FIRL LED Ring Illumination Unit
 P-DF LED Dark Field Unit
Chapter 3
Specific Operations
21
Adjusting the diascopic illumination brightness