Nikon SMZ25 Instruction Manual page 101

8
Attach the tube.
Attach a tube to be used to the epi illuminator or epi fluorescence attachment.
All types of tubes can be attached to the illuminator in the same manner.
(1) Completely loosen the M4 set screw for the tube at
the top front of the illuminator using a hex driver
(nominal designation: 2).
(2) Align and fit the round dovetail at the bottom of the
tube to the round dovetail of the illuminator and
tighten the fixing screw.
9
Attach the eyepiece.
Attach the eyepiece to the tube.
Two eyepieces with the same magnification are used.
Firmly insert the eyepiece until it contacts the end of the
tube sleeve.
Caution when attaching the eyepiece
Pay attention when inserting a 10x eyepiece because a rubber cover is attached and the eyepiece end is not visible. To
prevent malfunction, hold the rubber cap when inserting the 10x eyepiece. Do not hold the diopter adjustment ring
when inserting it.
Chapter 5
Assembling
87
Loosening the tube fixing screw
Attaching the tube
Attaching the eyepiece