Nosepiece; P2-Rni2 Intelligent Nosepiece - Nikon SMZ25 Instruction Manual

3

Nosepiece

P2-RNI2 Intelligent Nosepiece

3.1
The P2-RNI2 Intelligent Nosepiece can be attached with two
objectives. The attached objectives can be switched by turning
the nosepiece.
■ Stereoscopic view and vertical view
An intelligent nosepiece has two click positions for each
objective.
The click position switches between stereoscopic view and
vertical view. Microscopy with vertical view is possible when
needed, for example when taking a picture.
The click position of the objective can be checked by the
position of the objective viewed from the front or the color of
the hole on the objective status display area on the intelligent
nosepiece.
For systems where a control box has been connected, the
objective attachment position addresses and vertical-view state
are sent to the control box via a motorized focus unit or relay box,
and then transmitted to the DS-L3 DS Camera Control Unit and
personal computer.
SHR Plan apo 1 x WD:60
SHR Plan apo
Stereoscopic view
P2-FM Focus Mount Adapter
The P2-RNI2 Intelligent Nosepiece also serves as the
interface between the zooming body and focus unit. To
connect the zooming body with the focus unit, the P2-FM
Focus Mount Adapter must be connected.
Chapter 4
Functions and Operations of the Devices
Objective state
indication
2 x
WD:20
Objective position state (stereoscopic view and vertical view)
White
Vertical view
46
P2-RNI2 Intelligent Nosepiece
Objective state
indication
SHR Plan apo 1 x WD:60
2 x
SHR Plan apo WD:20
P2-FM Focus Mount Adapter
Nosepiece
Objective state
indication
White
Black