Bases, Stand, And Stages; P2-Pb Plain Base; P2-Dbl Led Diascopic Illumination Base; P2-Dbf Fiber Diascopic Illumination Base - Nikon SMZ25 Instruction Manual

5

Bases, Stand, and Stages

Bases consist of various focus stands in combination with the focus units. The base models include a base without a built-in
diascopic illumination system and a base with a built-in optical system for diascopic illumination.
A stand type is also available where a focus mount is connected to the support of the stand.
In all cases, a large stage plate (180 mm dia.) is used to enable more efficient work and easier observation of samples in
containers such as petri dishes.
The stage plate can be replaced with a stage having an X/Y shift knob or a sliding stage. It is also possible to attach other
devices such as a fiber illuminator or diascopic polarizing device to expand the base's functions.

P2-PB Plain Base

5.1
The plain base consists of a plain stand or a motorized plain stand
in combination with the P2-FU Focus Unit or P2-MFU Motorized
Focus Unit.
It is equipped with a stage plate having black and milky white
planes. Select the plain based on the sample being observed.
The plain base has three indents for holding the base: front of the
base's top board and on the right and left rear.
Tap holes for attaching accessories
The base's top board has tap holes for attaching various
accessories. Tap holes
prevent ingress of solution into the base.
(1)
2-M4: Positioned under the stage plate attachment
section of the base. Used for multiple
purposes.
(2)
4-M6: Positioned under the stage plate attachment
section of the base, Used for attaching the
P-SXY64 XY Stage.
(3)
2-M5: Positioned at the center on the top surface of
the base. Used for multiple purposes.
(4) 4-M4: Positioned at the center on the top surface of
the base. Used for multiple purposes.
(5)
4-M5: Positioned at the rear on the top surface of the
base. Used for attaching an accessory such as
the C-FDF Flexible Double Arm Fiber
Illumination Unit.

P2-DBL LED Diascopic Illumination Base

5.2
See "8.1 P2-DBL LED Diascopic Illumination Base" in this chapter.

P2-DBF Fiber Diascopic Illumination Base

5.3
See "8.2 P2-DBF Fiber Diascopic Illumination Base" in this chapter.
Chapter 4
Functions and Operations of the Devices
(2) (5)
to are not penetrating to
255
145
115
(2)
4-M6
Depth 8
Tap holes for attaching accessories
48
P2-PB Plain Base
20 100 20
184
40 70 40
80
(1)
2-M4
(5)
4-M5
Depth 7
(3)
2-M5
Depth 7
(4)
4-M4
Depth 6