Compact System Assembly - Nikon SMZ25 Instruction Manual

Chapter 5
Assembling

Compact System Assembly

3.2
1
Install the stand.
Select a location free of vibration. Install a P-PS32 Plain Stand on a level surface.
 Attaching a support to the stand
Fit the support to the stand and tighten the clamp screw
on the rear side using a hex driver supplied with the
support (The hex driver is inserted on the top of the
support).
Attaching the support by tightening the screw
 Attaching the stage plate
An acrylic stage plate having black and milky white planes
is supplied with the P-PS32 Plain Stand. Attach the stage
plate with the appropriate side facing up based on the
sample to be viewed.
Loosen the M4 set screw for the stage plate in the front
center of the base using a hex driver (nominal
designation: 2).
Tilt the stage plate, fit it into the base, and then tighten the
fixing screw.
Attaching the stage plate by tightening the screw
91