16
Internally Saved Information
In stereo microscopes, the following information saved in the control box is read and used. The lower limit and the escape
distance are previously set when the product is shipped. Other items are set to OFF or nothing is set. When using a
motorized system or intelligent (status detection) system for the first time, set the items as required by following the specified
procedures. For details, see the instruction manual supplied with the corresponding product.
Items
Objective
Eyepiece
Epi-fl filter cube
Motorized focus unit lower limit
Motorized focus unit escape distance
ALZ function
Items
Objective
Eyepiece
Epi-fl filter cube
*: The setting can be changed but cannot be saved.
Chapter 3
Specific Operations
P2-CTLA Control Box
Default
-
NIS-Elements and setup tools, DS-L3
-
Setup tools, DS-L3
-
NIS-Elements and setup tools, DS-L3
0 mm
NIS-Elements, remote controller
20 mm
NIS-Elements and setup tools
OFF
NIS-Elements and setup tools, remote controller
P2-CTLB Control Box
Default
-
NIS-Elements and setup tools, DS-L3
-
Setup tools, DS-L3
-
NIS-Elements and setup tools, DS-L3
36
Tools
*
*
Tools