Physical Properties - Nikon SMZ25 Instruction Manual

3

Physical Properties

Research stereo microscope SMZ25/SMZ18
Operating conditions
Transport/storage conditions
External dimensions
(W x H x L) and weight
Safety Standards
Chapter 8
Temperature: 0°C to +40°C
Humidity: 60% RH max. (no condensation)
Altitude: 2,000 m max.
Pollution level: Degree 2
Overvoltage Category: Category II
Short-term temporary overvoltage: 1440 V (5 sec. max.)
Long-term temporary overvoltage: 490 V (over 5 sec.)
Electrical shock protection class (AC Adapter): Class I
Indoor use only
Temperature: -20°C to +60°C
Humidity: 90% RH max. (no condensation)
310 x 550 x 573 mm, 25 kg
(The system shown in Chapter 1, "2 Microscopy System under Diascopic Illumination and
Epi-fluorescence Illumination" excluding the remote controller, control box and HG precentered
fiber illuminator is taken as an example.)
 UL listed product
 This product meets FCC Part 15B Class A requirements.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
 This Class A digital apparatus complies with Canadian ICES-003(A) / NMB-003(A).
Cet appareil numérique de la classe A est conforme à la norme NMB-003(A) du Canada.
 This product complies with Australian AS/NZS CISPR11 Group 1 Class B.
CE Marking
 This product meets EU Low Voltage Directive requirements.
 This product meets EU EMC Directive requirements.
Specifications
110