P2-Rly Relay Box; P2-Rlyc Relay Cable - Nikon SMZ25 Instruction Manual

 Connector names and connection destinations
The figure below shows the connectors on the rear of the control box and the connection destinations:
FOOT
(Connect to the CTRL connector
of the AZ-FSW Foot Switch using
the cable supplied with the foot
switch.)
REMOTE
(Connect to the P2-RC Remote
Controller.)
HGFIE
(Connect to the RS232C port of
the C-HGFIE HG Precentered
Fiber Illuminator.)
Use the power cable specified in Chapter 8, "2 Performance Properties."

P2-RLY Relay Box

11.3
When electrically connected to the following devises, the P2-RLY
Relay Box can relay signals for motorized control of the devices
and detect the device states:
(1) P2-CTLA Control Box
(2) P2-CTLB Control Box
(3) SMZ25 Zooming Body
(4) SMZ18 Zooming Body
(5) P2-EFLM Motorized Epi Fluorescence Attachment
(6) P2-EFLI Epi Fluorescence Attachment
(7) P2-RNI2 Intelligent Nosepiece
 The drive signals of devices (3) and (5) are relayed through
device (1) or (2). For devices (4), (6), and (7), address
information signals are relayed.

P2-RLYC Relay Cable

11.4
For systems where the P2-RLY Relay Box has not been
connected, the P2-RLYC Relay Cable is used to connect the
SMZ18 Zooming Body to the RELAY connector of the P2-CTLB
Control Box. This enables the status detection signals to be
relayed.
Chapter 4
Functions and Operations of the Devices
Rear of the P2-CTLA
USB
(Connect to the USB port of a personal
computer or the DS-L3.)
LEDDIA
(Connect to the LED light control terminal
of the P2-DBL LED Diascopic Illumination
Base using the cable supplied with the
control box.)
STAND
(Connect to the P2-MFU Motorized
Focus Unit or the P2-RLY Relay Box.)
DC24V IN
(Connect to the 24 V AC adapter.)
View A
Viewed from arrow A
FL
ZOOM
ZOOM
(Connect to the SMZ25/SMZ18
Zooming Body.)
To the SMZ18
Zooming Body
P2-RLYC Relay Cable
69
To the STAND connector
of P2-CTLA Control Box
or the RELAY connector
of P2-CTLB Control Box
FL
(Connect to the P2-EFLI/
P2-EFLM Epi Fluorescence
Attachment.)
NP
NP
(Connect to the P2-RNI2
Intelligent Nosepiece.)
P2-RLY Relay Box
To the RELAY
connector of
P2-CTLB
Control Box