Motorized Nosepiece; Polarizer Slider; Attaching The Polarizer Slider - Nikon ECLIPSE L200ND / ECLIPSE L200N Instructions Manual

3.10

Motorized nosepiece

Use the motorized nosepiece forward/reverse rotation switches to control the rotations of
the motorized nosepiece.
When using the reverse rotation switch to rotate in the reverse direction, rotating the
nosepiece in the direction from the nosepiece socket number "1" towards "6" is prohibited in
order to protect the observation target. Press the forward rotation switch while holding down
the reverse rotation switch to rotate from the socket number "1" towards "6."
Keep the halogen lamp turned off while motorized nosepiece is in motion.
When the L200ND microscope is connected with the C-HGFIE Precentered Fiber
Illuminator via the RS232C cross cable, the shutter is closed while the motorized nosepiece
is in motion.
3.11

Polarizer slider

Use together with the analyzer slider for episcopic bright-field simplified polarization
microscopy.
Use together with the analyzer and the DIC sliders for episcopic DIC microscopy.
Empty hole

3.11.1 Attaching the polarizer slider

Remove the cap near the indication "POLARIZER" at the right side of the microscope arm.
Insert the polarizer slider with its nameplate facing toward the eyepieces. Slide the slider in
and out of the microscope to find two click-stop positions on the slider.
3 Operation of Each Part
Figure-25 Polarizer slider
22
IC Inspection Microscope ECLIPSE L200ND / L200N Instructions
Orientation
adjustment screw
Polarizer