Table of Contents
Advertisement
d CTRL (CAM) (assistant panel)
connector
Connect the cable of the optional AP-1 Assistant
Panel.
For details, see "Attaching the AP-1 Assistant Panel
(Optional)" (page 39).
e Power ON (])/OFF (1) switch and
indicator
Push the switch to the ON side to power the unit
on (the indicator lights). Push it to the OFF side to
power the unit off (the indicator goes out).
f EARPHONES jack and LEVEL knob
Use the jack to attach earphones or stereo
headphones equipped with a stereo miniplug, for
use in monitoring audio during recording and
playback. Adjust the audio level with the LEVEL
knob.
A warning sound is heard through the earphones
or headphones when an error occurs.
Note
Some L-type mini plugs cannot be connected. Use a
straight type mini plug.
For details on the warning tone, see "Warning
System" (page 200).
g AUDIO indicator
Lights when the audio level meters (see page 26)
exceed a certain level.
h HD SDI MON1 (HDSDI monitor output
1) connector (BNC type)
Output HDSDI signals for display on a monitor.
You can select/set the output signals in the
Camera menu (see page 59). The same signals are
output from the HD SDI MON2 connector on the
rear panel.
i EXT I/O (external control) connector
(5-pin)
Use the connector for control via RS-232C.
Right Side
Display/menu operations section (page 18).
a Assignable buttons 5 to 8
You can assign frequently used functions to these
buttons by menu settings. The following
functions are assigned when the unit is shipped
from the factory.
Switches
Functions
5
STOP
6
PLAY
7
REW
8
F.FWD
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 54).
b Assignable buttons N and C
You can use the Camera menu to assign functions
to assignable buttons N and C. They are set to
OFF (disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 54).
c LOCK switch
When slid to the right, locks the operation buttons
on the right-side panel.
If you wish, you can set this switch so that it locks
all buttons except the RUN button. Make this
setting on the <SUBDISPLAY 2> page (see page
122) of the Camera >USER (OPERATION)
menu.
Locations and Functions of Parts
17
Advertisement
Table of Contents
