To detach the control panel
Hold down the lock release button and detach the
control panel by sliding it out.
Lock release button
To use the extension cable
1
Insert the belt bracket into hole [A] or
[B] of the cable holder (supplied).
Belt bracket
2
Detach the control panel.
3
Remove the two cable holder
attachment screws.
Holder attachment screws
4
Attach the cable holder, using the
attachment screws removed in step 2.
38
Attaching the Control Panel
Holder attachment screws
Cable holder
5
Attach the control panel.
6
Connect the cable of the control panel to
the CTRL (VTR) connector, and store
the excess length of the cable in the
cable holder.
1 Release the buckle
of the holder, 2 bundle
the cable by winding the
holder around it, 3 then
lock the buckle again.
7
Adjust the length by pulling the lower
end of the holder.