Sony SRW-9000PL Operation Manual page 61

I Setting
tem
DIRECTION CAM
PB
MODE Y-MIX
WIRE(W)
WIRE(B)
LEVEL 0 to 80%
WIPE
When MIX TYPE is set to WIPE, you can select
how pictures are to be wiped.
Item Setting
LAYOUT HOR
VERT
Content
The playback picture
is gradually mixed
into the camera image
(default).
The camera image is
gradually mixed into
the playback picture.
The Y signals are
mixed (default).
Only the outline
components are
mixed and displayed
with white lines.
Only the outline
components are
mixed and displayed
with black lines.
The mix level can be
adjusted (default:
80%).
Content
Horizontally split
(default)
Vertically split
Item Setting
PB RIGHT
POSITION
LEFT
BOTTOM
TOP
BOUNDARY With HOR:
0 to 1920
With VERT: 0
to 1080
To display a monitor LUT mark
When a monitor LUT (ITU-R709) is applied to
the SDI output from the HD SDI MON1 and HD
SDI MON2 connectors, or to the video in the
viewfinder, you can display an MLUT mark
(709ϒ) to indicate that the applied gamma is
different from the gamma of the recorded video.
Note
The monitor LUT function is enabled when you are
using S-LOG A.
Set MLUT MARK to ON, then set the brightness
and position of the indication.
Item Function
LEVEL For selecting the brightness of
the monitor LUT mark among 1
to 4 (4 is the maximum
brightness.)
Setting the Camera Outputs
Content
With HOR, the
playback picture is
displayed on the
right and the
camera image on
the left (default
when HOR is
selected).
With HOR, the
playback picture is
displayed on the
left and the
camera image on
the right.
With VERT, the
playback picture is
displayed in the
lower part and the
camera image in
the upper part
(default when
VERT is selected).
With VERT, the
playback picture is
displayed in the
upper part and the
camera image in
the lower part.
The boundary
position can be
changed (default:
with HOR: 960,
with VERT: 540).
61