Precautions - Sony SRW-9000PL Operation Manual

Code Message
0060 LOST LOCK
0061 SERVO NOT
READY
0067 CASSETTE REC
INHI
0070 CAM ERROR
0071 CAM WARNING
0078 CAM COM NG
02XX (A warning
message related to
the camera module)
Description
Capstan servo lock
lost during playback
or recording. (This
message remains
even after servo lock
is restored. You can
erase it by pressing
the PLAY button.)
The servo control
system is not in
standby because the
unit is in tape
protection mode.
The cassette is
record-protected.
An error has
occurred in the
camera module.
Check the viewfinder
indications to find
out what the problem
is.
A warning-level
error has occurred in
the camera module.
Check the viewfinder
indications to find
out what the problem
is.
A communication
error was detected
between the VDA
board and VPR
board. Power off and
restart the unit.
A warning-level
error was detected in
the camera module
(see page 202).

Precautions

Use and Storage
Do not subject the unit to severe shocks
The internal mechanism may be damaged or the
body warped.
After use
Always turn off the power.
Use and storage locations
Store in a level, ventilated place. Avoid using or
storing the unit in the following places:
• Places subject to temperature extremes
• Very damp places
• Places subject to severe vibration
• Near strong magnetic fields
• In direct sunlight or close to heaters for
extended periods
To prevent electromagnetic interference
from mobile communications devices
The use of mobile phones and other
communications devices near this unit can result
in malfunctions and interference with audio and
video signals.
It is recommended that communications devices
near this unit be powered off.
Note on laser beams
Laser beams may damage the CCDs. If you shoot
a scene that includes a laser beam, be careful not
to let the laser beam be directed into the lens of
the camera.
Condensation
See "Condensation" (page 209) in "Maintenance
and Inspections"
Phenomena Specific to CCD Image
Sensors
The following phenomena that may appear in
images are specific to CCD (Charge Coupled
Device) image sensors.
Precautions 207