Setting Recording Audio Levels - Sony SRW-9000PL Operation Manual

Select LR if you want to output the channel
from both sides.
3
Repeat step 1 to select other channels
and step 2 to make L/R settings for
those channels.
4
When you are finished, turn the
SELECT/ENTER dial to select END,
and press the dial.
To select the digital audio signal mixing
method
1
Turn the SELECT/ENTER dial to
select the mixing method.
ADD: Simple addition
RMS: Multiplied average (room mean
square)
Average: Simple average
2
Press the SELECT/ENTER dial.

Setting Recording Audio Levels

To check recording audio levels, use the audio
level meters in the control panel display. The
display switches automatically between
recording audio levels during recording and
playback audio levels during playback.
To set the display range of the audio
level meters
The AUDIO Setup >METER TYPE in the VTR
menu allows you to set the display range of the
audio level meters.
88 Recording
1
Turn the SELECT/ENTER dial to
select the scale to display.
Full Peak: Display 0 dBFS as the peak value.
Full Ref: Display the reference level (+4
dBu) as 0 dB.
Fine: Display a scale with steps of 0.25 dB
centered around.
2
Press the SELECT/ENTER dial.
To set recording audio levels
The AUDIO Setup >REC LEVEL in the VTR
menu allows you to set recording audio levels for
the individual channels.
Note
Recording levels cannot be set during playback.
Cursor
Recording level settings
Channel numbers
1
Turn the SELECT/ENTER dial to
select a channel (1 to 12).
2
Press the SELECT/ENTER dial.
The current recording level of the selected
channel is shown as a hexadecimal number.
Recording levels