Using The Ramp Function - Sony SRW-9000PL Operation Manual

<SHUTTER ASSIGN> page
STEP 1-8
On each line, the [deg] column displays a
registered shutter angle. The [sec] column
displays the corresponding shutter speed value,
converted according to the currently selected
frame rate.
ADD
Use this to register new shutter step values.
Display the shutter angle you wish to register, and
then press the MENU SEL/ENTER dial. You can
select angle values in the range from 360.0 to 4.3
degrees. Shutter step values are sorted
automatically in descending order.
If eight values have been already registered, the
message "STEPS FULL" appears, and a new
value cannot be added. In this case, use DEL (see
the following section) to delete an unneeded
value beforehand.
DEL
Use this to delete registered shutter step values.
When the cursor is positioned at DEL, an asterisk
(*) appears to the left of STEP 1.
Turn the MENU SEL/ENTER dial to move the
asterisk to the left of the value you wish to delete,
and then press the MENU SEL/ENTER dial. That
value is deleted, and the items after the deleted
one are automatically renumbered.
Example: Delete 90.0 at STEP 6
During step selection operations, the unit displays
registered values only. If you rarely use one of the
registered values, you can operate more quickly
by deleting it.
You can leave up to seven of the STEP numbers
(numbers 2 to 8) unregistered.
PRESET
Resets all step shutter values to the factory
defaults.

Using the Ramp Function

When the optional HKSR-9002 is installed, you
can use the ramp settings page of the subdisplay
or the <RAMP> page of the PAINT menu to
change the FPS (number of frames shot) during
shooting.
Ramp settings page
While the ramp settings page of the subdisplay is
displayed, assignable buttons 2 and 3 function as
ramp setting buttons, regardless of any other
functions that have been assigned to them (see
page 54).
Display of assignable
button 2 function
1
2 3 4
1 in the first line shows the current FPS.
Use this page to make the settings shown in the
following table.
Basic Settings with the Subdisplay
Display of assignable
button 3 function
5 6
47