Display/Menu Operations Section - Sony SRW-9000PL Operation Manual

d Assignable 4/AUTO BLK BAL (auto
black balance) switch
Push the switch downward to the AUTO BLK
BAL side to start the auto black balance
adjustment.
You can use the Camera menu to assign a
function to the 4 position (upper position). This
position is set to OFF (disabled) when the unit is
shipped from the factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 54).
e RUN button and indicator
Starts and stops recording. The indicator lights
during recording, and flashes when low voltage or
an error is detected.
For more information about the indicator operation,
see "Warning/Error Messages" (page 202).
f "Memory Stick" slot
Allows you to insert a "Memory Stick".
The access lamp lights in red while the unit is
writing or reading data to/from a "Memory
Stick". You can use "Memory Stick PRO" or
"Memory Stick PRO Duo" media with this unit.
("Memory Stick PRO Duo" media can be used
without any adaptor.)
Note
When the access lamp is lit in red, do not insert/remove
the "Memory Stick" or turn off the unit.
See "File Configuration" (page 186) for information
about data files that can be handled with "Memory
Stick" media.
For details on "Memory Stick" media, see "Using a
"Memory Stick"" (page 191).
g Tripod screw holes
Two screw holes (for
provided on the bottom-side panel.
h Riser plate/focus reference mark (φ)
This is a plate for attaching movie accessories. It
has a mark to show the focus standard position. A
wrench (2.5 mm) for use in attaching and
detaching the viewfinder is stored inside. When
you want to use a tripod with the optional VCT-
14 Tripod Attachment, exchange the riser plate
for the supplied V-shoe plate.
See "To use the optional VCT-14 Tripod
Attachment" (page 37) for more information about
attaching the V-shoe plate.
18 Locations and Functions of Parts
3
/ -inch camera screws) are
8
i Assignable buttons 1 to 3
You can assign frequently used functions to these
buttons by Camera menu settings. They are set to
OFF (disabled) when the unit is shipped from the
factory.
For details, see "Assigning Functions to Assignable
Buttons/Switch" (page 54).

Display/Menu Operations Section

For details, see "Basic Operations in the
Subdisplay" (page 44) or "Basic Camera Menu
Operations" (page 124).
a VF (viewfinder) MENU/DISPLAY
button
Displays and hides menus in the subdisplay and
viewfinder.
b CANCEL/STATUS button
Cancels settings made in the subdisplay and
viewfinder, or returns the display to a previous
state. When the Camera menu is not displayed,
you can press this button to display information
about the status of the unit in the subdisplay and
viewfinder.
See "Viewing Settings and Indications in the
Viewfinder" (page 64) for details about the status
information that appears