Sony SRW-9000PL Operation Manual page 46

1
Move the cursor to the left of "SC" (1
in the figure).
(When the unit switches to data modification
mode in the shutter settings page, the cursor
automatically appears to the left of "SC".)
2
Turn the MENU SEL/ENTER dial to
display the shutter value that you want
to use at 2 in the figure.
The shutter values change step by step as the
MENU SEL/ENTER dial is turned.
To select a shutter value by continuous operation
Continuous operation allows you to set shutter
values freely.
1
Move the cursor to the left of "SC" (1
in the figure).
2
Turn the MENU SEL/ENTER dial to
display the shutter value that you want
to use at 2 in the figure.
The shutter value changes continuously as
the MENU SEL/ENTER dial is turned.
To change the parameter display unit
You can change the parameter display unit
between shutter angle (degree) and shutter speed
(second).
1
Move the cursor to the left of
the figure).
2
Turn the MENU SEL/ENTER dial.
The display at 2 changes to a speed value
(seconds).
The speed value for a given shutter angle
varies depending on the selected video
format and frame rate.
To select the frame rate (number of frames to
shoot)
When the optional HKSR-9002 is installed, and
you have selected the Select FPS video format,
select the frame rate (number of frames to shoot).
Note
The frame rate cannot be changed when a format other
than Select FPS is selected.
46 Basic Settings with the Subdisplay
1
Move the cursor to the left of the frame
rate (4 in the figure).
2
Turn the MENU SEL/ENTER dial to
select the desired frame rate (number of
frames to shoot).
To use a compensation mode
When the optional HKSR-9002 is installed, you
can compensate for changes in the video level that
occur when the frame rate (number of frames to
shoot) is changed. There are two compensation
modes, which compensate by adjusting the
shutter angle or electrical gain.
1
Move the cursor to the left of "CMP"
(5 in the figure).
2
Turn the MENU SEL/ENTER dial to
select the compensation mode to use.
AC (angle compensation mode): When the
frame rate is changed, the video level is
held constant by automatically adjusting
the shutter angle.
GC (gain compensation mode): When the
frame rate is changed, the video level is
held constant by automatically adjusting
the electrical gain. The shutter angle is
held constant.
(2 in
See "Detailed Shutter Settings" (page 73) for details
about compensation modes and about compensation
mode menu operations.
When you are not using the shutter
Select OFF at 3.
The shutter value indication at 2 becomes "----".
To change the registered shutter values
You can change registered shutter step values in
the <SHUTTER ASSIGN> page of the Camera
>USER (OPERATION) menu.
For details on how to operate the Camera menu, see
"Basic Camera Menu Operations" (page 124).
You can also use the <SHUTTER> page of the
Camera >USER (PAINT) menu to change a
registered shutter step value.
See "Detailed Shutter Settings" (page 73) for more
information about the <SHUTTER> page.