Sony SRW-9000PL Operation Manual page 60

<PB/MON LUT> page
To apply monitor LUT to the monitor
picture
When MLUT/PBMIX is set to MLUT, the
monitor LUT (ITU-R709) appropriate for
monitoring is applied to the video signals output
from the VF, HD SDI MON1, HD SDI MON2,
and REMOTE connectors. The video output
signals from those connectors are selected on the
<MONITOR OUTPUT> page.
This setting is effective when S-LOG gamma is
applied to the video output signals for recording
intended for postproduction editing.
1) The VBS output signal always becomes the camera
image to which ITU-R709 gamma is applied.
Notes
• The monitor LUT function is enabled when you are
using S-LOG A.
• Some of the paint settings (black, gamma, knee, detail,
matrix, etc.) for the main line are not applied to
monitor LUT.
To monitor the playback picture
You can monitor the on a playback picture can be
confirmed with an external monitor or on the
1)
viewfinder screen.
1)When MLUT/PBMIX is set to MLUT or OFF, the
same gamma as that applied to the main line is applied
to all the outputs. When MLUT/PBMIX is set to
PBMIX, the PB and PB MIX modes can be
independently selected for the VF/VBS and MON. VF
and VBS output the same signals respectively.
You can change the PB setting separately for the
VF/VBS and MON to select their playback signal
output modes.
60 Setting the Camera Outputs
To compare the playback and camera
pictures
When PB (playback signal output mode) is set to
AUTO, you can set PB MIX to ON to display the
playback picture and the camera picture in the
same screen.
You can change the PB MIX setting separately
for the VF/VBS and MON to turn playback signal
mixing on and off. The setting for both VF and
VBS is the same. When it is turned on, the
playback picture and camera output are mixed.
You can also use the <PB MIX SETTING> page
1)
of the Camera >USER (OPERATION) menu to
select the playback picture and camera picture
display modes.
<PB MIX SETTING> page
MIX TYPE
Select how to display the playback and camera
pictures.
MIX
When MIX TYPE is set to MIX, how to mix the
pictures can be selected.
Setting Function
AUTO Normally, the camera picture is output.
When the unit enters playback mode
(PLAY, FF, REW, or REC REVIEW),
the playback picture is automatically
selected (default).
CAM The camera picture is always output.
Setting How to display
MIX The playback picture and camera image
are overlapped (default).
WIPE The screen is horizontally or vertically
split in two, and two pictures are
displayed simultaneously.