Table of Contents
Advertisement
1
Insert the "Memory Stick" into the
"Memory Stick" slot of the unit.
2
Move the cursor to READ (MS t
CAM) and press the MENU SEL/
ENTER dial.
Unit settings change to reflect the settings loaded
from the reference file.
Reading User Gamma Curves
You can read gamma-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the cursor to READ
(MS t CAM) in the USER GAMMA section
and press the MENU SEL/ENTER dial.
Reading User MLUT Files
You can read MLUT-curve (user gamma) data
that has been created using the CvpFileEditor
application software and saved to a "Memory
Stick". Use the <USER GAMMA> page of the
FILE menu.
Insert the "Memory Stick" into the "Memory
Stick" slot of the unit. Move the cursor to READ
(MS t CAM) in the MLUT section and press the
MENU SEL/ENTER dial.
Storing OHB Files
Use the <OHB FILE> page of the FILE menu.
1
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
2
Use the MAINTENANCE menu to set
the items marked with "√" in the "O"
column of the table in "List of Items
Stored in Files" (page 189) to the state
that you want to store.
3
Display the <OHB FILE> page of the
FILE menu, move the cursor to STORE
FILE, and then press the MENU SEL/
ENTER dial.
Adjusting ND offset values
If an ND filter is attached to the matte box, etc.,
the white balance may be in variance. In such a
case, adjust the ND offset so that you can retrieve
the white balance compensation value using the
ND filter selection page on the subdisplay.
The offset values ND: 2 to 5 are stored with
respect to the white balance stored for ND: 1 as
the reference.
1
Switch the camera to Custom mode,
referring to "Switching between the
Basic Operation Modes" (page 43).
2
Execute STANDARD on the
<REFERENCE> page of the FILE
menu.
File Operations
195
Advertisement
Table of Contents
