Sony SRW-9000PL Operation Manual page 180

Item
FORMAT
Signal format settings
TEST SG
Test signal output settings
Note
Powering off the unit returns
the setting to "OFF" (factory
default).
180 VTR Menu List
Settings
FPS FORMAT Selects the system format when the Select FPS function is
enabled.
DEF [Default]: Use the factory default settings.
23/24 [23.98/24]
25 [25]
29/30 [29.97/30]
50 [50]
59/60 [59.94/60]
For details on the settings, see "Select FPS Function" (page
107).
3G/DUAL When the optional HKSR-9001 is installed, selects the
output from the HD SDI A/B connectors.
DUAL [AUX OUT 1.5G]: 1.5G Dual Link
3G [3G]: 3G Single Link
For details, see "What Are Dual Link and 3G?" (page 212).
INPUT SEL Selects the monitoring or recording target between the
camera picture and the video signal input to the AUX IN
connector. "AUX Input" can be selected only when a 4:2:2
video signal is input to the AUX IN connector.
CAM [CAM]: Camera picture
AUX [AUX Input]: Video signal input to the AUX IN
BARS Turn the internal color bar generator ON/OFF.
OFF [Off]: Output color bar signals.
ON [On]: Do not output color bar signals.
AUDIO Selects the test signal generated by the internal audio signal
generator.
OFF [Off]: Generate no test signal.
1KHz [1KHz Sine]: Generate a sine wave signal of 1 kHz.
NONE [Silence]: Generate a silent signal.
connector